INJECTION MOLDING FACILITY IN EDMONTON – WESTERN CANADA
Injection Molding
- 8 Injection Molding Machines
- 8 Silos for Railcar Storage / Mass Purchases, numerous resins (1,400,000 lbs)
- 3 Overhead cranes (5 ton capacity each)
- Robots and Conveyors on all machines
Mold Development and Design
- Mold Building
- Mold Maintenance
Extrusion
- 3 Extrusion lines
- Profiles up to 5″
| Make | Tonnage | PS Shot | Tie Bar Clearance | Max Daylight | Robot |
|---|---|---|---|---|---|
| Mitsubishi | 720 (W) | 160 oz | 41.7" x 41.7" (W) | 70.9" | ABB |
| Mitsubishi | 720 | 147 oz | 37.4" X 37.4" | 70.9" | ENGEL |
| Mitsubishi | 720 | 147 oz | 37.4" X 37.4" | 70.9" | ENGEL |
| Mitsubishi | 720 | 101.9 oz | 37.4" X 37.4" | 68.4" | ENGEL |
| Battenfeld | 500 | 107 oz | 31.5" X 31.5" | 60.2" | ABB |
| Mitsubishi | 270 | 28.6 oz | 22" X 22" | 39.4" | ENGEL |
| Mitsubishi | 210 | 16.3 oz | 22.4" X 22.4" | 35.4" | ENGEL |
| Mitsubishi | 210 | 16.3 oz | 22.4" X 22.4" | 35.4" | ENGEL |
Machining
| Equipment | Manufacturer | Model | Swing Over Bed | Swing Over Carriage | Max. Turning Size | Max Turn Length | Spindle Bore | Chuck Size | HP | Max. Rpm |
|---|---|---|---|---|---|---|---|---|---|---|
| Lathe | Acru Tum | jFMT360t5039084 | 8" | 4-1/2" | 36" | 1-5/8" | 8 | 5 | 2000 |
| Equipment | OEM | Model | X Table | Y Table | X Travel | Y Travel | Z Travel | Max. Rpm | Spindle 1HP | Spindle Type | Table Capacity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manual Mill | Challenger | JF185VSL | 50" | 10" | 37 8/16" | 16" | 16" | 4200 | 3 (1HP) | CAT40 | |
| Manual Mill | First | LC-20VHS | 51 3/16" | 10 4/16" | 31 2/16" | 16 9/16" | 16 9/16" | 177 3/16 | 3 (1HP) 5 (2HP) | CAT40 | |
| CNC Mill | OKK | MCV-410 | 39 3/8" | 17 23/32" | 30" | 16 1/8" | 20" | 3500 | 10 (1HP) | CAT 50 | 1540 lbs |
| Equipment | OEM | Model | Cap. Height | Cap. Width | HP | Reach Radius | Height |
|---|---|---|---|---|---|---|---|
| Horizontal Saw | HYD. Mech | S-20 | 13 | 18 | 3 | ||
| Band Saw | Do-All | 2013-V | 13 | 20 | 2 | ||
| Radial Arm Mill | MAS | VR2 | 8 | 4-1/2" | |||
| Cutter Grinder | Clarkson | ||||||
| Tool Grinder | Friedrich Deckel | ||||||
| Bench Grinder | Wagner | 911165-01 | |||||
| Bench Grinder | Delta | 23-660C | |||||
| Belt Grinder | House of Tools |
Other Capabilities
- Regrind Facilities to 60hp
- Wire Forming – Press Tonnage Size: two of 50 Tons, three of 30 Tons, one of 10 Tons
- Vacuum Forming – Roll Production – 3 In-line 22″, 27″, 32″ wide
- Vacuum Forming – Sheet Production – one 41.5″ x 86.75″, two 30″ x 60″, two 27″ x 30″, two 26″ x 26″, one 16″ x 24″, one 12″ x 16″
- Metal Fabrication
- Infrared technology, barcode-ready
- 5 Truck Level Dock Doors
INJECTION MOLDING FACILITY IN BRAMPTON, ONTARIO
Injection Molding
- 12 Injection Molding Machines
- 6 Silos for Railcar Storage / Mass Purchases, numerous resins (500,000 lbs)
- Overhead crane (10 ton capacity)
- Conveyors
Mold Development and Design
- Mold Building
- Mold Maintenance
Other Capabilities
- Regrind Facilities to 75hp
- Infrared technology, barcode-ready
- 6 Truck level Dock Doors
| Make | Tonnage | PS Shot | Tie Bar Clearance | Max Daylight | Robot |
|---|---|---|---|---|---|
| UBE | 1500T | 220 oz | 57.1 x 55.1 | 110.2" | Hy Robotics |
| Wintec (Engel) | 1500T | 339 oz | 57.9" X 53.5" | 94.4" | Hy Robotics |
| Make | Tonnage | PS Shot | Tie Bar Clearance | Max Daylight | Robot |
| Mitsubishi | 1200 | 188 oz | 51.2" X 47.2" | 88.6" | Hy Robotics |
| Mitsubishi | 950 | 192.6 oz | 51.2" X 47.2" | 88.6" | Hy Robotics |
| Nissei | 720 | 132 oz | 43.3" X 43.3" | 77.1" | YUSHIN |
| Nissei | 720 | 132 oz | 43.3" X 43.3" | 75.1" | YUSHIN |
| Nissei | 720 | 132 oz | 43.3" X 43.3" | 75.1" | YUSHIN |
| Battenfeld | 500 | 107 oz | 31.5" X 31.5" | 60.2" | ENGEL |
| Battenfeld | 500 | 68 oz | 31.5" X 31.5" | 60.2" | ENGEL |
| Nissei | 310 | 18 oz | 26" X 26" | 45.3" | YUSHIN |
| Nissei | 310 | 18 oz | 26" X 26" | 45.3" | YUSHIN |
| Nissei | 200 | 14.8 oz | 20.8" X 20.8" | 37.4" | YUSHIN |